Auto Pc Adjust; Auto Pc Adj; Auto Pc Adj - Panasonic PT-VX41 Operating Instructions Manual

Auto PC adjust

Auto PC adjust
Select [PC adjust] from the Main Menu (see
"Navigating through the menu" on page 33),
then select the item from the sub-menu.
Remote Control

Auto PC adj.

Auto PC adjustment function is provided to
automatically adjust [Fine sync], [Total dots],
[Horizontal] and [Vertical] positions to conform to your
computer.
Press ▲▼ to select [AUTO PC adj.] and
then press the <SELECT> button.
[Please wait...]
z
adjustment is in process.
To store adjustment parameters
The adjusted parameters from the Auto PC adjustment
can be stored in the projector. Once the parameters
are stored, the setting can be done just by selecting a
Mode (1–10) in the PC System Menu (see page 36).
See also [Store] on page 40.
Attention
[Fine sync], [Total dots], [Horizontal] and [Vertical]
z
position of some computers cannot be fully adjusted
with the Auto PC adjustment function. When the image
is not provided properly with this operation, manual
adjustments are required (
The Auto PC adjustment cannot be operated when
z
[480i], [576i], [480p], [576p], [720p], [1 035i] or [1 080i] is
selected in the PC System Menu (
the signal is coming from the HDMI terminal.
38
- ENGLISH
Control Panel
appears while the Auto PC
Æ
pages 39-40).
Æ page 36), or when