7: Quick Edit Assign - Yamaha VL-1m Feature Reference

Feature Reference
• The "Element 2" parameter will not appear if the "Voice Mode" param-
eter (

7: Quick Edit Assign

QED1 (cc16)
QED2 (cc17)
Assigns the available common or element edit parameters to the corresponding
MIDI controller (QED1 = control change number 16; QED2 = control change number
17). The controllers can then be used in the PLAY mode to edit the assigned parameters
in real time while playing (the same applies to the EDIT and UTILITY modes). The
parameter consists of two parts which can be selected independently by moving the
cursor horizontally. The first (leftmost) part determines what type of parameter will be
controlled.
off
Com
E1
E2
Both
The second (rightmost) part is the actual parameter which will be controlled. The
parameters available for editing via the continuous sliders are individually preset for each
voice.
• Since the controllers actually edit the parameters to which they are assigned,
the "new" voice created by using the controllers can be stored to one of the
VL1-m's voice memory locations and used just as if it had been edited in the
EDIT mode (
• The quick edit view function, available in the PLAY mode (
shows you which parameters are assigned to which controller as well as the
current positions of the controllers and their corresponding values.
Edit Mode
Page 32) is set to "Single".
Controller not assigned. Choose this setting if you don't want the
controller to affect any edit parameters.
Selects the common edit parameters.
Selects the element 1 edit parameters. This setting will appear as "E1*"
if previously set to "E2" or "Both" with the Voice Mode parameter set to
"Dual", then the Voice Mode parameter is switched to "Single".
Selects the element 2 edit parameters.
Selects element edit parameters that will affect both element 1 and
element 2.
the STORE operation is described on page 27).
Page 13),