Table of Contents
Advertisement
Feature Reference
Voice Name
To enter a new voice name position the cursor at the "Voice Name" parameter
and press [ or • ("Name" — "Name" only appears above the • button when
the cursor is positioned at the "Voice Name" parameter). The VOICE NAME display
will appear.
Use the cursor , and . buttons to move the cursor to the character in the
•
voice name at the top of the display that you want to change.
Use the = and - buttons or data dial to select a new character by
•
moving through the character list row by row.
Press the ™ button ("Spc") to enter a space at the current cursor position.
•
Press the £ button ("Clr") to clear the entire voice name.
•
Press ] or [ when the voice name is complete.
•
E1 Name, E2 Name
These parameters allow independent names to be entered for the E1 and E2 ele-
ments of the current voice (only E1 is available in a single-element voice). To enter a
new element name position the cursor at the "E1 Name" or "E2 Name" parameter and
press [ or • ("Name"). The ELEMENT NAME display will appear. Procedure is
the same as for the Voice Name parameter, above, except for the function of the ¢
button, below.
Press the ¢ button ("Auto") to copy the voice name to the element name
•
(suffixes "_A" and "_B" will be appended to the E1 and E2 names respec-
tively).
Key Mode
In conjunction with the Voice Mode parameter, below, the Key Mode parameter
determines how the VL1-m's two elements are used to produce sound.
Mono
Only a single note can be played at a time.
Poly
Two different notes may be played simultaneously.
Unison
Playing a single key produces two notes in unison.
Edit Mode
Advertisement
Table of Contents
