Advertisement
Quick Links
HT-380BPC, 8800BPC, 9700C OM.qxd
10/16
11:42 AM
Page 1
Owner's Manual
Honeywell
IMPORTANT SAFETY
INSTRUCTIONS
Tech Force
Power Hie i i Velocity Fans
HT-380 Series
HT-8800 Series
HT-9700 Series
7. To disconnect the fan, first turn control to,
the OFF position, grip the plug and pull it
from the wall outlet. Never pull by the
cord.
READ AND SAVE THESE SAFETY
INSTHUCTIONS BEFORE USING
THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1.
Use this fan only as described in this
manual. Other use not recommended
may cause fire, electric shock or injury to
persons.
2.
This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.
3.
To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
4.
This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of shock, this plug is intended to
fit only one way in a polarized outlet. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT
attempt to defeat this safety feature.
5.
Close supervision is necessary when any
appliance is used by or near children.
6.
Turn the fan to the OFF position and
unplug the fan from the outlet when not in
use, when moving the fan from one
location to another, before cleaning and
before removing the fan grille.
The Honeywell trademark is used by Kaz, Inc.
8.
Do not operate the fan in the presence of
explosive and/or flammable fumes.
9.
Do not place the fan or any parts near an
open flame, cooking or other heating
appliance.
10. Do not operate the fan with a damaged
cord or plug or if the product
malfunctions, is dropped or damaged in
any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not
recommended by the manufacturer may
be hazardous.
13. Place the fan on a dry level surface.
14. Do not operate if the fan housing is
removed or damaged. Do not operate the
fan if the grille is removed or not properly
assembled.
15. Do not operate on desktops or tabletops.
This fan is intended for use on floors
only.
16. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the plug.
Contact a qualified electrician to replace a
loose or worn outlet.
WARNING: To Reduce The Risk of Fire op
Electric Shock, Do Not Use This Fan With Any
Solid-State Speed Control Device.
license from Honeywell International Inc.
Advertisement
