Honeywell TURBO FORCE HT-906 Series Owner's Manual

Owner's Manual
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
FOR US MODELS ONLY - This product employs
overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation.
If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user
servicing instructions (follow product marking
for proper fuse rating) and check the product.
If the replacement fuse blows, a short-circuit
may be present and the product should be
discarded or returned to an authorized service
facility for examination and/or repair.
1
. Use this fan only as described in this manual. Other
use not recommended, may cause fire, electric shock
or injury to persons.
2. This product is intended for household use ONLY and
not for commercial, industrial or outdoor use.
3.
To protect against electric shock, do not place fan in
window, immerse unit, plug or cord in water or spray
with liquids.
4.
This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of shock,
this plug is intended to fit only one way in a polarized
outlet. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician.
DO NOT attempt to defeat this safety feature.
5. Close supervision is necessary when any appliance is
used by or near children.
TURBO FORCE
HIGH VELOCITY
OSCILLATING POWER
AIR CIRCULATOR
HT-906 Series
6. Turn the fan to the OFF position and unplug the fan
from the outlet when not in use, when moving the fan
from one location to another and before cleaning.
7. To disconnect the fan, first turn control to the OFF
position, grip the plug and pull it from the wall outlet.
Never pull by the cord.
8.
Do not operate the fan in the presence of explosive
and/or flammable fumes.
9.
Do not place the fan or any parts near an open flame,
cooking or other heating appliance.
10. Do not operate the fan with a damaged cord or plug
or if the product malfunctions, is dropped or damaged
in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended by the
manufacturer may be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on ceiling.
15. Do not operate if the fan housing is removed or
damaged.
16. A loose fit between the AC outlet (receptacle) and
plug may cause overheating and a distortion of the
plug. Contact a qualified electrician to replace loose
or worn outlet.
17. Do not operate any fan with a damaged cord or plug.
Discard any damaged fan, or return the fan to the
retailer where the fan was purchased, or request
a return authorization to return to Kaz USA, Inc. for
examination and/or repair.
18. Do not run fan cord under carpeting. Do not cover
cord with throw rugs, runners, or similar coverings.
Do not route cord under furniture or appliances.
Arrange cord away from traffic areas and where it will
not be tripped over.
WARNING:
To Reduce The Risk of Fire
or Electric Shock, Do Not Use This Fan With
Any Solid State Speed Conrol Device
®