Assembly - Husqvarna TC 112 Operator's Manual

• Make sure that all nuts and bolts are tightened
correctly and that the equipment is in good condition.
• Do not change the adjustment of governors. If the
engine speed is too high, the product components
Introduction
WARNING:
safety chapter before you assemble the
product.
Assembly overview
To install the steering wheel
Assembly overview on page 13 for the correct
Refer to
fasteners for this task.
1903 - 004 - 18.12.2023

Assembly

Read and understand the
can become damaged. Refer to
page 40 for highest permitted engine speed.
• The product is approved only with the equipment
supplied or recommended by the manufacturer.
1. Install the steering column cover. The steering
column cover is attached by snap locks. Press down
on the steering column cover until it locks in position.
Technical data on
13