Advertisement
Using the Tape Deck
GEH-M2050 does not include this tape deck
function.
Parts Identification
(Fig. 1)
[2] Eject
[3] Cassette Door
[5] Fast Forward, Rewind/Direction Change
[9] Music Search
(10] Metal
[11] Dolby B NR
[19] Display
(Fig. 3)
[31] Dolby
B NR
[32] Metal
[33] Direction
{[34] Music Search
About cassette tapes
* Do not use tapes longer than C-90-type
(90 min.) cassettes. Longer tapes can in-
terfere with tape transport.
* Storing cassettes in areas directly ex-
posed to sunlight or high temperatures
can distort them and subsequently inter-
fere with tape transport.
- Store unused tapes in a tape case where
there is no danger of them becoming
loose or being esposed to dust.
Cleaning the head
if the playback head becomes dirty, sound
quality will suffer. Periodically (once or
twice a month) clean the head with a cotton
swab soaked with alcohol.
Head
Alcohol
Cotton swab
Listening to a tape
1.Insert the cassette tape into the slot [3],
and power will be turned on and the tape
begin being played back.
At this time, the tape running direction indi-
cator [33] will light up.
2.Adjust volume and tone (see page 6).
3.To eject the cassette tape, press the but-
ton [2].
* Be sure to eject the tape when the front
panel is removed, or the vehicle's ignition
is turned OFF. Leaving the tape in the unit
can deform the pinch roller causing wow
and flutter during tape playback.
* A loose or warped label on a cassette
tape may interfere with the eject mecha-
nism of the unit or cause the cassette to
become jammed in the unit. Avoid using
such tapes or remove such labels from
the cassette before attempting use.
* Do not try to eject the cassette immedi-
ately after insertion, as it will cause mal-
function. Wait a few seconds.
Changing Program
Push the fast forward and rewind buttons
[5] together to switch from one side of the
tape to the other (from Side A to Side B or
vice versa).
Using Fast Forward and Rewind
Since the transport can be in either direc-
tion, both the left and right high-speed tape
transport buttons [5] can be regard as fast
forward/rewind buttons. For fast forward,
press the high-speed tape transport button
[5] that corresponds to the direction that is
shown by the direction indicator [33]. When
the end of the tape is reached, playback will
automatically begin from the opposite side
of the tape (Auto-reverse). For rewind,
press the button [5] that is opposite that of
the direction shown by the direction indica-
tor [33]. When the end of the tape is
reached, playback will automatically begin
from the beginning of the same side of the
tape (Auto-replay).
When you release fast forwad/rewind, light-
ly press button [5] located on the opposite
side of the one you pressed to fast foward
or rewind.
« "<>" [33] will flash when the tape is fast
forwarding or rewinding.
Advertisement
