Punch-In Recording - Yamaha QY-300 Owner's Manual

Song Mode — Part 2: Basic Recording

Punch-in Recording

26
Click (Metronome) Settings
The click mode parameter in the SONG display determines whether the metro-
nome sounds only during recording, during both recording and playback, at all
times, or not at all. Move the cursor to this parameter and set as required using
the data dial or [–1/NO] and [+1/YES] keys.
The "Click" (metronome) parameter
The Click beat parameter
Off Metronome off.
Rec Metronome sounds during realtime recording only.
Ply Metronome sounds during realtime recording and playback.
All Metronome sounds at all times.
The click beat parameter determines on what beat the metronome will sound
(the [PLAY] key indicator will also flash on the specified beat). Move the
cursor to this parameter and set as required using the data dial or [–1/NO] and
[+1/YES] keys.
The metronone sounds on every sixteenth note.
The metronone sounds on every eighth note.
The metronone sounds on every quarter note.
The metronone sounds on every half-note.
The metronone sounds on every whole note beat.
Punch-in recording is a special type of realtime recording in which you specify
a range of measures you want to record, leaving all other material on the track
intact. This is particularly useful for re-recording a short segment of an other-
wise perfect track — so you don't have to re-record the entire track.