Punch Recording - Yamaha QY700 Owner's Manual

5. Song Recording

Punch Recording

Recording
track
SHIFT F1 F2
• With punch recording, you record over (replace) a specific
area in an already recorded track. You begin by setting up
the start and end points (the punch-in and punch-out points)
for the area you want to replace. You then record over the
area in real time.
• You set the punch-in and punch-out points by specifying
the measure and beat.
• With the exception of the punch-in and punch-out settings,
this method is identical to the REPLACE method for
realtime recording. For additional information, see page 112.
1. Starting from the SONG PLAY screen, press
The QY700 displays the Recording Standby page. The RE-
CORDING indicator comes on.
2. Press (PUNCH).
3. Press
select the track you want to record. You can select any
of the sequence tracks (TR1,...,TR32) or the PATTERN,
CHORD, or TEMPO track.
4. Press [D2] to position the cursor in the punch-
point entry area. Set the punch-in and punch-out val-
ues (both measure and beat) using the data dial,
, or the numeric keypad.
118
F3 F4 F5
or as necessary to
Chapter 2. SONG MODE
Song measure
Punch-in point
Punch-out point
Recording mode
F6 SHIFT EXIT
5. Press
measure entry area. Set the measure at which you
want playback to begin.
• You will generally want to start playback several measures
before the punch-in point.
6. Press
The PLAY indicator begins flashing, and song playback be-
gins from the measure you specified at Step 5 above. The
QY700 then automatically switches into recording opera-
tion when the song reaches the punch-in point. It then
.
resumes playback upon reaching the punch-out point.
7. Input the data you wish to record, in real time. When
you are finished, press
screen.
Punch-In Point
• This is the point within the song at which the QY700 be-
gins realtime recording operation. You set this point by speci-
fying its measure and beat.
Punch-Out Point
• This is the point within the song at which recording stops,
/
and the QY700 resumes song playback. You set this point
by measure and beat.
SONG PLAY
Song Recording
PUNCH
TR1~TR32
PATTERN
CHORD
TEMPO
[D1] to move the cursor to the song-
.
to return to the SONG PLAY