Advertisement
1. Channel messages
Reception note range =C-2~G8
Velocity range = 1~127 (Velocity is received only for Note Off)
Not received by a Part for which the Multi Part parameter Rcv NOTE MESSAGE =
OFF
Not received by a Rhythm Part for which Rcv NOTE OFF = OFF
Key On is not received by a Rhythm Part for which Rcv NOTE ON = OFF
Control Changes are not received by a Part for which the Multi Part parameter Rcv
CONTROL CHANGE = OFF
Cntrl#
parameter
Data Range
0
Bank Select MSB 0:Normal, 64:SFX, 126-127:Drum
32
Bank Select LSB
0...127
Bank Select processing is suspended until a Program Change is received.
When Sound Module Mode = C/M, all Bank Select messages are ignored.
Cntrl#
parameter
Data Range
1
Modulation
0...127
When the Multi Part parameter Rcv MODULATION = OFF, that Part will not receive
Modulation messages.
Cntrl#
parameter
Data Range
5
Portamento Time 0...127
When the parameter 1.2.9 Portamento = ON, this adjusts the speed of pitch change.
A setting of 0 is minimum portamento time, and 127 is longest portamento time.
Cntrl#
parameter
Data Range
6
Data Entry MSB
0...127
38
Data Entry LSB
0...127
Use this to set the value of the parameter specified by RPN and NRPN.
Cntrl#
parameter
Data Range
7
Main Volume
0...127
When the Multi Part parameter Rcv VOLUME = OFF, that Part will not receive
Volume messages.
Cntrl#
parameter
Data Range
10
Pan
0...127
0 is left, 127 is right.
When the Multi Part parameter Rcv PAN = OFF, that Part will not receive Pan
messages.
Cntrl#
parameter
Data Range
11
Expression
0...127
When the Multi Part parameter Rcv EXPRESSION = OFF, that Part will not receive
Expression messages.
Cntrl#
parameter
Data Range
64
Hold1
0...127
When the Multi Part parameter Rcv HOLD1 = OFF, that Part will not receive Hold1
messages.
Cntrl#
parameter
Data Range
65
Portamento
0...127
When the Multi Part parameter Rcv PORTAMENTO = OFF, that Part will not receive
Portamento messages.
(0-63:off, 64-127:on)
(0-63:off, 64-127:on)
Cntrl#
parameter
Data Range
66
Sostenuto
0...127
When the Multi Part parameter Rcv SOSTENUTO = OFF, that Part will not receive
Sostenuto messages.
Cntrl#
parameter
Data Range
67
Soft Pedal
0...127
When the Multi Part parameter Rcv SOFT PEDAL= OFF, that Part will not receive Soft
Pedal messages.
Cntrl#
parameter
Data Range
71
Harmonic Content 0...127
This message adjusts the resonance specified by the voice data. Since this is a relative
change parameter,
specify the increase or decrease relative to a center value of 64. Higher values will result
in a more characteristic sound.
Depending on the voice, the range of effect may be narrower than the range available
for setting.
Cntrl#
parameter
Data Range
72
Release Time
0...127
This message adjusts the envelope release time specified by the voice data. Since this is
a relative change parameter,
specify an increase or decrease relative to a center value of 64.
Cntrl#
parameter
Data Range
73
Attack Time
0...127
This message adjusts the envelope attack time specified by the voice data. Since this is a
relative change parameter,
specify an increase or decrease relative to a central value of 64.
Cntrl#
parameter
Data Range
74
Brightness
0...127
This message adjusts the cutoff frequency specified by the voice data. Since this is a
relative change parameter,
specify an increase or decrease relative to a central value of 64. Lower values will result
in a softer sound.
For some voices, the range of effect may be narrower than the range available for
adjustment.
Cntrl#
parameter
Data Range
84
Portamento Control 0...127
Portamento Control is transmitted specifying the Note On Key of currently-sounding
note.
Specify a Portamento Source Key number of 0~127. When a Portamento Control
message is received,
the currently sounding pitch will change with a Portamento Time of 0 to the key of the
next-received Note On on the same channel.
This message is received even if Rcv PORTAMENTO = OFF
Cntrl#
parameter
Data Range
91
Effect1 Depth
0...127
This message sets the send level for the reverb effect.
Cntrl#
parameter
Data Range
93
Effect3 Depth
0...127
This message sets the send level for the chorus effect.
10
(0-63:off, 64-127:on)
(0-63:off, 64-127:on)
(0:-64, 64:+0, 127:+63)
(0:-64, 64:+0, 127:+63)
(0:-64, 64:+0, 127:+63)
(0:-64, 64:+0, 127:+63)
Advertisement
