Settings: NoEffect, Hall1 - 2, Room1 - 3, Stage1 - 2, Plate,
W-Room (White Room), Tunnel, Basement
Default: Hall1
This determines the Type of Reverb effect, or the performance
environment that is simulated. When "NoEffect" is selected, the
Reverb effect is turned off.
Reverb Send Level
Reverb Send
Level setting
Selected
Part
Range: 0 - 127
Default: 40
This determines the level of the selected Part's Voice that is sent to
the Reverb effect. Each Part can be set independently for different
amounts of Reverb on each Voice. A value of "0" results in a
completely "dry" Voice sound.
NOTE
•
Keep in mind that Reverb Type (above) must be set to something other
than "NoEffect" for this parameter to work as intended.
E d i t M o d e
Reverb Type
RevType
Hall1
RevSend
The current Type setting
appears in the LCD as
soon as the TYPE
button is released.
Reverb Type
setting
Shows Reverb
Send Level setting
for each Part.
57