Input Level Meter; Input Level Control - Yamaha R1000 Operating Manual

FRONT PANEL
l 2 3 4
æ= le
C)
YAMAHA
BOO
ew
m Q):
DIGITAL REVERBERATION <
VR tle DV FA D BE —
mON/ÆOFF
oO POWER MODE INPUT LEVEL
@ POWER SWITCH
@ MODE SELECTOR
Select the mode by preference of reverb tone and time.
& INPUT LEVEL METER
© INPUT LEVEL CONTROL
When peaking the equalizer, set the input level lower so that clipping
margin of the equalizer circuit is provided.
@ EQUALIZER
nw ee
AD DIRECT REVERB] o 10
EQUALIZER MIXING [OUTPUT LEVEL BYPASS Cc)
LOW: cenna ae wa ace 50Hz ~ 700Hz
MID u u ce oss rach Br 350Hz ~ 5kHz
HIGH goa kite as 2kHz ~ 20kHz
Equalization may be varied continuously in each respective band. User can
produce sound at will by first setting the equalizer to peaking or dipping
position and then sweeping through the standard frequency.
@ EQUALIZER SWITCH
By setting the switch on, the indicator above the switch will light, enabling
control over each band. With the switch off, a "flat" signal is reproduced.
A better signal/noise ratio will be obtained by switching the equalizer off
rather than setting each of the equalizer controls to the "0" position.
e EQUALIZER RESPONSE (Reverberation Signal)
+15
+ s
+ x
R
Fræk
o
RESPONSE ( dB )
Ü a
H s
L a
tk
FREQUENCY (Hz)