Setting Up Oms - Yamaha MOTIF 6 Software Manual

Setup Files for remote control of sequencing
software
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
To use these files, the appropriate sequencing software should be installed to
your computer.
Setup Files for Cubase
Same as for Windows. See page 7.
Preference File for Logic
1 Start Logic.
2 Select Key Commands... in Settings from the Option menu.
3 Select Import Key Commands... from the Option menu in the "Key
Commands" window called up via step #2.
4 In the dialog window called up via step #3, select the preference file for
Logic named "Logic Preferences" in the included CD-ROM and click
[Open].
After importing the file, the following setup appears.
Please note that the Key Command settings are replaced with the preference
file.
Pro Tools
The special setup file is not necessary for using Pro Tools.
1 Select Peripherals... from the "Setup" menu.
2 Click the [MIDI Controllers] button in the "Peripherals" windows called up
via step #1.
The MIDI Controllers window appears and set as follows.
Type Receive From
#1 CS-10 YAMAHA USB IN 0-3
n
If the MOTIF is connected to the computer via MIDI, set the port to 1.
The setup has been completed and you can control Pro Tools from the
MOTIF.
Send to #ch's
YAMAHA USB OUT 0-3 16
Cubase VST 5.0 Demo version
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
1 Double-click on the "Seq_Demo" folder.
The "Cubase" folder will be displayed.
2 Double-click on the "Cubase" folder.
The "Cubase VST 5.0 DEMO Installer" will be displayed.
3 Double-click on the "Cubase VST 5.0 DEMO installer" file.
4 Execute the installation by following the on-screen directions.
Logic Audio Platinum 4.6 Demo
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
1 Double-click on the "Seq_Demo" folder.
The "Logic" folder will be displayed.
2 Copy the "Logic" folder to the hard disk on your computer.

Setting up OMS

The OMS studio setup file for the MOTIF is contained in the included CD-
ROM. This studio setup file is used for setting up OMS.
n
Before performing the following procedure, the OMS and USB MIDI Driver should be
installed.
1 Use a USB cable to connect the USB terminal of the computer (or the USB
hub) to the USB terminal of the MOTIF and turn the MOTIF's power on.
2 Start the computer.
3 Insert the included CD-ROM into the CD-ROM drive of your Macintosh
computer. The CD-ROM icon appears on the desktop.
4 Double-click on the CD-ROM icon, "International", "OMS", and "OMS
Setup for YAMAHA."
The two files "MOTIF-USB" and "MOTIF-USB_multi" appear. Copy these
to the hard disk on your computer.
5 Double-click on the "MOTIF-USB" or "MOTIF-USB_multi" file to start the
OMS Setup. Each studio setup file is as follows.
• MOTIF-USB
This is used when connecting a single MOTIF to the computer and using
one port (up to 16 MIDI channels).
• MOTIF-USB_multi
This is used when connecting several MOTIFs to the computer and using
up to eight ports (up to 128 MIDI channels). Note that one MOTIF can
handle up to three ports (up to 48 MIDI channels).
n
Use of a USB hub is necessary when several MOTIFs are connected to the computer.
n
Be sure to select [MOTIF-USB_multi] when using the Remote Control function of the
MOTIF via the USB cable, since Port 3 is used in this case.
11