Table of Contents
Advertisement
Self-diagnosis
display
Your camcorder
has a self-diagnosis
display
function.
This function
displays
the current
condition
of
your camcorder
as a 5-digit code (a combination
of
a letter and figures)
on the LCD screen,
in the
viewfinder,
or in the display
window.
If a 5-digit
code is displayed,
check the following
code chart. The last two digits (indicated
by DE])
will differ depending
on the state of your
camcorder.
LCD screen,
viewfinder
or
display
window
-4121:6bq
/
Self-diagnosis display
° C:OE]:IZIr7
You can service
your camcorder
yourself.
oE:E]E]:E]N
Contact
your Sony
dealer
or local
authorized
Sony facility.
Five-digit display
Cause and/or Corrective Actions
C:04:[Zln
• You are using a battery
pack that is not an
"InfoLITHIUM"
battery
pack.
-> Use an "InfoLITHIUM"
battery
pack. (p. 13)
_,
C:21:E]r7
• Moisture
condensation
has occurred.
_' Remove
the cassette
and leave your camcorder
for at
least 1 hour to acclimatize.
(p. 117)
__
C:22:U]E]
" The video heads
are dirty.
=
÷ Clean the heads using the Sony V8-25CLD
cleaning
cassette
(not supplied).
(p. 118)
o
C:31:E]UI
• A malfunction
other than the above that you can service
=
C:32:rTr7
has occurred.
Remove
the cassette and insert it again, then operate
your camcorder.
-'> Disconnect
the power
cord of the AC power
adaptor
or
remove
the battery
pack. After reconnecting
the power
source, operate
your camcorder.
E:61:E]E]
• A malfunction
that you cannot
service has occurred.
E:62:r70
"_ Contact
your Sony dealer or local authorized
Sony
service facility
and inform them of the 5-digit code.
(example:
E:61:10)
If you are unable
to rectify the problem
even if you try corrective
actions
a few times,
contact
your Sony dealer or local authorized
Sony service
facility.
113
Advertisement
Table of Contents
