Table of Contents
Advertisement
Self-diagnosis
display
Your camcorder
has a self-diagnosis
display
function.
This function
displays
the current condition
of
your camcorder
as a 5-digit code (a combination
of
a letter and figures) on the LCD screen,
in the
viewfinder,
or in the display
window.
If a S-digit code is displayed,
check the following
code chart. The last two digits (indicated
by C]C])
will differ depending
on the state of your
camcorder.
LCD screen, viewfinder
or
display
window
Self-diagnosis display
•C:C]C1:CIC]
You
can
service
your
can/corder
yo urself.
• E:CIC]:C]C1
Contact your Sony dealer or local
authorized
Sony facility.
Five-digit
display
C:04:CIC1
C:21:CIC1
C:22:CIC1
C:31:CIC1
C:32:CIC1
E:61:CIC1
E:62:CIC1
Cause and/or
Corrective
Actions
• You are using a battery
pack that is not an
"InfoLITHIUM"
battery
pack.
• ") Use an "InfoLITHIUM"
battery
pack. (p. 14)
• Moisture
condensation
has occurred.
• ") Remove
the cassette
and leave your camcorder
for at
least i hour to acclimatize.
(p. 137)
• The video heads
are dirty.
• ") Clean the heads using the Sony V8-25CLD cleaning
cassette
(not supplied).
(p. 138)
• A malfunction
other than the above that you can service
has occurred.
• ") Remove
the cassette
and insert it again, then operate
your
caincorder.
• ") Disconnect
the power cord of the AC power
adaptor
or
remove the battery pack. After reconnecting
the power
source, operate
your camcorder.
• A malfunction
that you cannot service has occurred.
• ") Contact
your Sony dealer or local authorized
Sony
service facility and inform them of the 5-digit code.
(example:
E:61:10)
If vou are unable to rectify tire problem
exen if you try corrective
actions a few times,
contact your Sony dealer or local authorized
Sony service facilitv.
O.
0
K
O
g.
133
Advertisement
Table of Contents
