Table of Contents
Advertisement
Setup Menus /
• Device No. (Number)
Range: 1 ... 16
This determines which tone generator the AN200 Editor will send data to. This should be
set to same number as the Device Number of the tone generator/sound card to which the
AN200 is installed. If you have multiple tone generators in your MIDI setup and each is
set to a different Device Number, this parameter lets you select which tone generator will
be affected by the AN200 Editor. If you are using only one tone generator, this should be
set to "1."
• Output when edited
When this is checked, any edits that you make with the AN200 Editor are instantly and
automatically transmitted to the AN200. This ensures that you can audition edits as soon
as you make them.
• OK
Click this to apply all the settings you've made in the three tabs.
• Cancel
Click this to return to the main AN200 Editor window without changing any of the settings.
Others Tab
• Parameter Knob Operation
Rotate
When this is selected, the parameter values (of the panel "knobs") are changed by
moving the mouse in a circular direction.
Up/down or left/right
When this is selected, the parameter values (of the panel "knobs") are changed by
moving the mouse vertically or horizontally.
• OK
Click this to apply all the settings you've made in the three tabs.
• Cancel
Click this to return to the main AN200 Editor window without changing any of the settings.
AN200 Editor Setup
68
Advertisement
Table of Contents
