Procedure For Quick Edit - Yamaha MONTAGE M6 Operation Manual

When you press the [NAVIGATION] button during editing, you can easily find where you
are on the map.
2
Select the desired parameter for editing.
Select Part Common for editing the settings for the entire Part.
If you wish to go into detailed settings, select one of the following: Element 1 to 128,
Operator 1 to 8, Oscillator 1 to 3, Noise, and C0 to C6 keys of the Part.
3
Select the icon for the setting you wish to change.
Use the Cursor buttons to move the cursor and then press the [ENTER] button. Or, tap
the icon on the screen.
4
Change the parameters shown on the screen.
5
Save the Performance.

Procedure for Quick Edit

1
Use the [QUICK EDIT] button, Tab PAGE buttons, and Tab selection
buttons to change pages and tabs on the Sub display.
30