Yamaha MONTAGE M6 Operation Manual page 276

Sets the velocity range (lowest and highest values) for Arpeggio playback.
When this is set so that the higher value is first and the lower value is second (for example, 93
to 34), the Arpeggio is played only for velocities of 1 to 34 and 93 to 127.
Settings: 1–127
Arp Note Limit (Arpeggio Note Limit)
Sets the note range (the lowest and the highest notes) for Arpeggio playback.
When the first note specified is higher than the second (for example, C5 to C4), the notes in
the ranges C−2 to C4 and C5 to G8 will be played.
Settings: C−2–G8
Octave Shift (Arpeggio Output Octave Shift)
Shifts the pitch of the Arpeggio in octaves.
Settings: −10–+0–+10
Octave Range (Arpeggio Octave Range)
Shifts the range of the Arpeggio in octaves.
Settings: −3–+0–+3
Arp Select (Arpeggio Select)
Selects the Arpeggio.
Settings: 1–8
Individual
On the Individual screen, you can set the Arpeggio type parameters for Arpeggio Select 1 to 8.
Tapping the Arpeggio Type setting calls up the menu. Selecting Search opens the Arpeggio
Category Search screen. Selecting Number allows you to specify the Arpeggio Type by number.
Operation
[PERFORMANCE] → Part Common selection → [EDIT/
(When a selected Part is something other than Common) [SHIFT] + [ARP ON/OFF]
] → Arpeggio → Individual
276