Table of Contents
Advertisement
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the following components:
a.
Expansion card
b.
Internal USB key
c.
Heat sink module
d.
Processor
e.
Memory module
Steps
1. Disconnect all cables from the system board.
CAUTION:
Take care not to damage the system identification button while removing the system board from
the chassis.
Figure 54. System board screw location
2. Using a Phillips 2 screwdriver, remove the screws that secure the system board to the chassis.
3. Using the system board holder, slide the system board toward the front of the chassis.
4. Incline the system board at an angle and lift the system board out of the chassis.
62
Installing and removing system components
Safety
instructions.
Before working inside your
system.
Advertisement
Table of Contents
