Panasonic ER-GP21 - Rechargeable Professional Hair Clipper Manual

Panasonic ER-GP21 - Rechargeable Professional Hair Clipper Manual

Also See for ER-GP21:

Advertisement

Panasonic ER-GP21 - Rechargeable Professional Hair Clipper Manual

Intended use

  • This clipper is designed for professional use to trim hair. It can be operated on rechargeable battery.
  • Before and after each use, apply oil at the marked places.
    Failure to apply the oil may cause the following problems.
    • The clipper has become blunt.
    • Shorter operating time.
    • Louder sound.
  • Do not use thinner, benzine, alcohol or other chemicals. Doing so may cause failure, cracking or discoloration of the main body.
    Clean the main body only with a soft cloth slightly dampened with tap water or soapy tap water.
  • You should not allow permanent wave lotion, hair dyeing or hair spray to come into contact with the main body or the blades. Doing so may result in cracking or corrosion.
  • Before using an attachment, check that it has been installed correctly. Failure to do so may cause hair to be cut too short.

Parts identification

Parts identification

  1. Main body
    1. Power switch [ ]
    2. Charge indicator lamp ()
    3. Appliance socket
  2. Blade
    1. Mounting hook
    2. Cleaning lever
    3. Moving blade
    4. Stationary blade
  3. 3 mm comb attachment (3 mm (1/8˝))
  4. 6 mm comb attachment (6 mm (1/4˝))
  5. AC adaptor (RE9-84)
    1. Charging plug
    2. Comb attachment shelves
    3. Cord
    4. Power plug

Accessories

  1. Cleaning brush
  2. Oil

Charging the unit

  • Make sure that the clipper is turned off.

  1. Place the clipper on the AC adaptor.
  2. Insert the power plug into a household outlet.
    • Charging is completed after approx. 15 hours.
    • Check the charge indicator lamp ( ) glows.
  3. Disconnect the power plug after charging is completed.
    (for safety and to reduce energy usage)
    • The charge indicator lamp ( ) continues to glow after charging is complete. There is no indication to show that "charging is complete".

Notes

  • If there is crackling noise on radios or other devices while charging, charge the clipper using a different household outlet.
  • When the appliance is not used for 6 months or more, the battery will weaken (leak battery fluid, etc.). Fully charge the battery once every 6 months.
  • When charging the clipper for the first time or when it has not been in use for more than 6 months, the lamp on the main body may not glow for a few minutes, or the operating time may shorten. Please charge it for more than 23 hours in such cases.
  • Recommended ambient temperature for charging is 0°C – 35°C (32°F – 95°F). Battery performance may decrease outside of the recommended temperature.
  • 1 full charge will provide approximately 60 minutes of continuous operation.
  • You can charge the battery before it is completely discharged. However, it is recommended to charge when the battery is completely discharged. The battery life depends strongly on factors such as how it is used and stored.

Using the device

  • Make sure that the clipper is turned off.
  • The appliance may not operate in an ambient temperature approximately 0°C (32°F) or lower.
  1. Select the trimming heights indicated on the insides and sides of the attachments.
  2. Slide the power switch on the main body to the " " position to turn on the clipper.

Mounting the comb attachments


(Example: in the case of 3 mm (1/8˝))
Slide the attachment until it clicks.

Removing the comb attachments


Remove the attachment by pressing with your thumb.

Care

Removing and mounting the blade

  • Make sure that the clipper is turned off.


Removing the blade
Hold the clipper with the switch facing upward and push the blade with your thumb while catching the blade in your other hand.

Care - Mounting the blade
Mounting the blade
Fit the mounting hook into the blade mounting on the clipper and push in until it clicks.

Cleaning

  • Clean the clipper and the blade after each use. (If not cleaned, the motion will become poor and the sharpness will worsen.)
  • Make sure that the clipper is turned off.
  1. Brush off any hairs from the clipper and from around the blade.
  2. Brush off the hairs from the blade edge.
  3. Brush the hairs out from between the stationary blade and the moving blade while pressing down on the cleaning lever ( ) to raise the moving blade.

Lubrication

  • Apply the oil to the clipper before and after each use.
    Apply a drop of the oil to each indicated point.
    Attach the blade to the main body, turn on the power and allow to run for approximately 5 seconds.
    Failure to apply the oil may cause the following problems due to rust, wear or burn out.
    • The clipper has become blunt.
    • Shorter operating time.
    • Louder sound.

Replacement parts
Replacement part is available at your dealer or Service Center

Replacement parts for ER‑GP21 Blade WER9352

Cleaning the AC adaptor

Care - Cleaning the AC adaptor
Use the cleaning brush to clean hair trimmings and dust in the charging plug, the comb attachment shelves or in the hole on the bottom surface.

Storing comb attachments


You can store your comb attachments in the comb attachment shelves.

Troubleshooting

Problem Action

The unit has become blunt

Until problems are solved, please follow each procedure as follows;
  1. Charge the clipper.
  2. Clean the blade and apply oil.
  3. Replace the blade.
  4. Have the battery replaced by an authorized service center.

Operating time is short

The unit stopped functioning

The device cannot be charged

Push the main body into the charging stand or appliance plug all the way.
Charge within the recommended charging temperature of 0°C (32°F) to 35°C (95°F).

Makes a loud sound

Apply oil.
Have the battery replaced by an authorized service center.

If the problems still cannot be solved, contact the store where you purchased the appliance or a service center authorised by Panasonic for repair.

Removing the built-in rechargeable battery

ATTENTION:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1‑800‑8‑BATTERY for information on how to recycle this battery.

Remove the built-in rechargeable battery before disposing the clipper.
This figure must only be used when disposing the clipper, and must not be used to repair it. If you dismantle the clipper yourself, it may cause malfunction.

  • Remove the clipper from the AC adaptor.
  • Slide the power switch to turn on the power and then keep the power on until the battery is completely discharged.
  • Perform steps 1 to 8 and lift the battery, and then remove it.
    Removing the built-in rechargeable battery
  • Take care not to short circuit the positive and negative terminals of the removed battery, and insulate the terminals by applying tape to them.

Specifications

Power source See the name plate on the AC adaptor.
Motor voltage 1.2 V
Charging time Approx. 15 hours

Safety precautions

burn hazardshock hazard
To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions.

Explanation of symbols

The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.

Denotes a potential hazard that will result in serious injury or death.
Denotes a potential hazard that could result in serious injury or death.
Denotes a hazard that could result in minor injury or property damage.

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users to a specific operating procedure that must not be performed.
This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions are required to always be followed, including the following.
Read all instructions before using (this appliance)


To reduce the risk of electric shock:

  1. Do not reach for an appliance that has fallen into water. Unplug immediately.
  2. Do not use while bathing or in a shower.
  3. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.
  4. Except when charging, always unplug this appliance from the electrical outlet immediately after using.
  5. Unplug this appliance before cleaning.

burn hazardburn hazard
To reduce the risk of burns, fire, electric shock, or injury to persons:

  1. Close supervision is required when this appliance is used by, on, or near children or invalids.
  2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
  3. Never operate this appliance when it has a damaged cord or plug, when it is not working properly, after it has been dropped or damaged, or after it has been dropped into water. Return the appliance to a service center for examination and repair.
  4. Keep the cord away from heated surfaces.
  5. Never drop or insert any object into any opening.
  6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
  7. Do not use this appliance with a damaged or broken comb, as it has the potential to result in facial injury.
  8. Always attach plug to appliance first, then to outlet. To disconnect, turn all controls to "off" then remove plug from outlet.

SAVE THESE INSTRUCTIONS


Power supply
Do not connect or disconnect the power plug to a household outlet with a wet hand.

  • shock hazard Doing so may cause electric shock or injury.


Do not immerse appliance and AC adaptor in water or wash it with water.
Do not place the appliance and AC adaptor over or near water filled sink or bathtub.
Never use the appliance if the AC adaptor is damaged or if the power plug fits loosely in a household outlet.
Do not damage or modify, or forcefully bend, pull, or twist the cord.
Also, do not place anything heavy on or pinch the cord.

  • burn hazardshock hazard
    Doing so may cause electric shock or fire due to a short circuit.

Keep the appliance dry.


Do not use in a way exceeding the rating of the household outlet or the wiring.

  • burn hazard Exceeding the rating by connecting too many plugs to one household outlet may cause fire due to overheating.


Do not use anything other than the supplied AC adaptor. Also, do not charge any other product with the supplied AC adaptor.


  • Doing so may cause burn or fire due to short circuit.


Always ensure the appliance is operated on an electric power source matched to the rated voltage indicated on the AC adaptor. Fully insert the power plug.

  • burn hazardshock hazard
    Failure to do so may cause fire or electric shock.


Always unplug the power plug from a household outlet when cleaning.

  • shock hazard Failure to do so may cause electric shock or injury.


Regularly clean the power plug and the charging plug to prevent dust from accumulating.

  • burn hazard Failure to do so may cause fire due to insulation failure caused by humidity.
    Disconnect the power plug and wipe with a dry cloth.

► In case of an abnormality or malfunction

Immediately stop using and remove the power plug if there is an abnormality or malfunction.

  • burn hazardshock hazard
    Failure to do so may cause fire, electric shock, or injury.


<Abnormality or malfunction cases>

  • The main unit or AC adaptor is deformed or abnormally hot.
  • The main unit or AC adaptor smells of burning.
  • There is abnormal sound during use or charging of the main unit or AC adaptor.
    • Immediately request inspection or repair at an authorized service center.

This product
This product has a built-in rechargeable battery. Do not throw into flame or heat.

  • Doing so may cause fluid leak, overheating, or explosion.


Do not modify or repair.

  • burn hazardshock hazard
    Doing so may cause fire, electric shock, or injury. Contact an authorized service center for repair (battery change, etc.).


Never disassemble except when disposing of the product.

  • burn hazardshock hazard
    Doing so may cause fire, electric shock, or injury.

► Preventing accidents
Do not store within the reach of children or infants. Do not let them use it.

  • Putting the blade, and/or oil container in the mouth may cause accidents and injury.


If the oil is consumed accidentally, do not induce vomiting, drink a large amount of water, and contact a physician.
If the oil comes into contact with eyes, immediately wash thoroughly with running water, and contact a physician.

  • Failure to do so may result in physical problems.


This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

  • Failure to do so may cause an accident or injury.


If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

  • Failure to do so may cause an accident or injury.


► Protecting the skin


Do not press the blade against the skin.
Do not use the clipper for any purpose other than hair trimming.
Do not directly apply the blades on ears or rough skin (such as swellings, injuries or blemishes).

  • Doing so may cause injury to ears or uneven skin.


Check that the blades are not damaged or deformed before use.

  • Failure to do so may cause skin injury.

► Note the following precautions


Do not allow metal objects or trash to adhere to the power plug or the charging plug.

  • burn hazardshock hazard
    Doing so may cause electric shock or fire due to a short circuit.


Do not drop or subject to shock.

  • Doing so may cause injury.


Do not wrap the cord around the AC adaptor when storing.

  • burn hazardshock hazard
    Doing so may cause the wire in the cord to break with the load, and may cause fire due to short circuit.


Disconnect the power plug from the household outlet when not charging.

  • burn hazardshock hazard
    Failure to do so may cause electric shock or fire due to electrical leakage resulting from insulation deterioration.


Disconnect the power plug by holding onto the power plug instead of the cord.

  • shock hazard Failure to do so may cause electric shock or injury.


► Handling of the removed battery when disposing
The rechargeable battery is exclusively for use with this clipper. Do not use the battery with other products. Do not charge the battery after it has been removed from the product.

  • Do not throw into fire or apply heat.
  • Do not solder, disassemble, or modify the battery.
  • Do not let the positive and negative terminals of the battery get in contact with each other through metallic objects.
  • Do not carry or store the battery together with metallic jewellery such as necklaces and hairpins.
  • Never peel off the tube.
    • Doing so may cause fluid leak, overheating, or explosion.


After removing the rechargeable battery, do not keep it within reach of children and infants.

  • The battery will harm the body if accidentally swallowed. If this happens, consult a physician immediately.


If the battery fluid leaks out, do not touch the battery with your bare hands.

  • The battery fluid may cause blindness if it comes in contact with your eyes.
    Do not rub your eyes. Wash immediately with clean water and consult a physician.
  • The battery fluid may cause inflammation or injury if it comes in contact with the skin or clothes.
    Wash it off thoroughly with clean water and consult a physician.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Panasonic ER-GP21 - Rechargeable Professional Hair Clipper Manual

Advertisement

Need Assistance?

Do you have a question about the ER-GP21 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents