NEC UNIVERGE SV9100 Manual page 240

240
Quick Transfer to Voice Mail – K-CCIS
Feature Description
A station user transferring a call can force the call to be transferred to the called party voice mail box after
the transferred call recalls, after an internal station number is dialled while performing a screened transfer,
or during intercom calls.
System Availability
Terminal Type:
All multiline terminals allow either operation.
Single line telephones may perform the Quick Transfer only during screened transfer operations. They may
not perform Quick Transfer after recall.
Required Components
GPZ-IPLE
Operating Procedures
Quick Transfer Across K-CCIS:
To Quick Transfer a call while talking with an outside or internal party:
1. Press Transfer, and wait for an internal dial tone.
2. Enter a station number, and wait for a ring back tone.
3. Dial the Quick Transfer Access Code. The outside party is transferred to the station user Voice
Mail box.
4. Hang up.
5. The Voice Mail answers.
To leave a message using Quick Transfer to voice mail during an intercom call:
1. Make the intercom call.
2. Dial the Quick Transfer Access Code.
3. Leave a voice mail message.
4. Hang up.
Service Conditions
General:
The Quick Transfer to Voice Mail feature is allowed when:
This feature is allowed from a single line telephone (SLT) until the PBR times out (default: 10
sec).
An SLT may perform the Quick Transfer only during screened transfer operations.
VM8000 InMail is supported in a KTS to KTS network for K-CCIS.
Related Feature List
Digital Voice Mail
Guide to Feature Programming
This guide provides a list of associated Programs that support this feature.
Listening to the ring back tone (RBT)
Listening to the call waiting tone (CWT)
In Handsfree Answerback Mode
In Voice Over Mode