Safety - Husqvarna CL400 Operator's Manual

Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
instructions that follow before you use the
product.
• This product is dangerous if used incorrectly or if you
are not careful. Injury or death can occur if you do
not obey the safety instructions.
• This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this product.
• Always be careful and use your common sense. If
you are not sure how to operate the product in a
special situation, stop and speak to your Husqvarna
dealer before you continue.
• Keep in mind that the operator will be held
responsible for accidents that involve other persons
or their property.
• Keep the product clean. Make sure that you can
clearly read signs and decals.
• Never allow children or people unfamiliar with these
instructions to use the appliance. Local regulations
may restrict the age of the operator.
• Always monitor a person, with decreased physical
capacity or mental capacity, that uses the product. A
responsible adult must be there at all times.
• Do not use the product if you are tired, ill, or
under the influence of alcohol, drugs or medicine.
This has a negative effect on your vision, alertness,
coordination and judgment.
1394 - 003 - 05.12.2023
Used if there is a risk of
Used if there is a risk of
Read the warning

Safety

• Do not use the product if it is damaged or does not
operate correctly.
• Do not change this product or use it if it is possible
that it has been changed by others.
Work safety
WARNING:
instructions that follow before you use the
product.
• Use the product to put boundary wire and guide wire
for robotic lawn mowers into the ground. Do not use
the product for other tasks.
• Use personal protective equipment. Refer to
Personal protective equipment on page 10 .
• Make sure that you know how to stop the motor
quickly in an emergency.
• Do not operate the product in rain or wet conditions.
The risk of electrical shock increases if water enters
the product.
• Do not operate the product unless the drill and
all covers are attached correctly. An incorrectly
attached drill can come loose and cause injury.
• Remove objects such as branches, twigs and stones
from the work area before you use the product.
• Objects that hit against the cable laying equipment
can eject and cause damage to persons and objects.
Keep bystanders and animals at a safe distance
from the product.
• Never use the product in bad weather such as fog,
rain, strong winds, intense cold and risk of lightning.
To use the product in bad weather or in moist or wet
locations is tiring. Bad weather can cause dangerous
conditions, such as slippery surfaces.
• Look out for persons, objects and situations that can
prevent safe operation of the product.
• Look out for obstacles, such as roots, stones, twigs,
pits and ditches. Long grass can hide obstacles.
• Do not use the product on ground that slopes more
than 15°.
• Exercise extreme caution when changing direction
on slopes. Operate the product across the face of
slopes. Do not move up and down.
• Be careful when you go near hidden corners and
objects that prevent a clear view.
• Make sure that the drill does not hit objects such as
stones and roots. This can do damage to the drill
and bend the motor shaft. A bent motor shaft causes
heavy vibration and a very high risk that the drill
becomes loose.
• If the drill hits an object or if vibrations occur,
stop the product immediately. Stop the motor, pull
up the safety key and remove the battery. Wait
until moving parts stop. Examine the product for
Read the warning
9