Add Network Camera Via Custom Protocol - HIKVISION DS-7600NI-I2 Series User Manual

Before You Start
Ensure your network camera is on the same network segment with that of your video recorder.
●
Ensure the network connection is valid and correct.
●
Ensure the network camera is activated.
●
Steps
1. Go to System → Device Access → Device → Video Device .
2. Click Add.
3. Enter network camera parameters.
Use Channel Default Password
If it is enabled, the video recorder will add the camera by the set channel default password.
More Settings
You can enable Verify Certificate to verify the camera with certificate. The certificate is a form
of identification for the camera that provides more secure camera authentication. It requires
to import the network camera certificate to the device first when you use this function.
4. Optional: Click Continue to Add to add other network cameras.
5. Click Add.

6.1.3 Add Network Camera via Custom Protocol

For network cameras that are not using standard protocols, you can configure custom protocols to
add them. The system provides 8 custom protocols.
Network Video Recorder User Manual
Figure 6-2 Add Network Camera Manually
20