Figure 2-8
5. (Optional) Drill the cable hole, when the cables are
routed through the wall.
6. Secure the camera to the cover of the wall mount with
three PM4 × 13 screws and three M4 screws.
Figure 2-9 Secure Camera to Wall Mount Cover
7. Route the cables through the cable hole of the wall
mount and connect the cables.
8. Insert one end of the wall mount cover diagonally into
the wall mount body, and then snap the other end of
the cover upward on the body.
9. Lock the cover to the body with one PA3 × 8 screw.
10. Repeat steps 4 to 6 of 2.1.1 Ceiling/Wall Mounting to
adjust the angle and finish the installation.
3 Menu Description
Please follow the steps below to call the menu.
Note:
The actual display may vary with your camera model.
Secure Main Body to Wall
Figure 2-10 Secure Cover to Body
Figure 2-11 Lock Cover to Body