Table of Contents
Advertisement
Head Cleaning
Playing older or damaged tapes may eventually
cause video heads to become clogged.
Video Head Clog Sensor
During playback this
screen appears if
clogging is detected.
To remove screen,
press PLAY on the
remote or VCR.
VIDEO HEADS MAY
NEED CLEANING
PLEASE
INSERT HEAD
CLEANING
CASSETTE
OR REFER TO MANUAL
ENO:PLAY
KEY
¢ Use "dry" type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
—
Cleaning Tape
Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
If head clog symptoms persist, contact your
nearest Factory Service Center or authorized
Service Center. (See page 32.)
Cleaning the VCR
Use a soft cloth or dusting attachment of
your vacuum cleaner to dust your VCR.
Remove dust from the ventilation holes on
the back sides and bottom of the cabinet.
Plastic surfaces are easily scratched and
can be marred by alcohol and various
solvents. Avoid excessive use of oil-based
furniture polishes since the materials used
in the cabinet will accumulate more dust.
We recommend using a nonabrasive,
antistatic cleaner and polisher.
Specifications
Power Source:
Power Consumption:
Video Signal:
Video Recording System:
Audio Track:
Tuner:
Broadcast Channels:
CABLE Channels:
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
Note:
Designs and specifications are subject to change
without notice.
Features for a Quality Picture
120V AC, 60 Hz
Approx. 18 watts (Power On)
Approx. 3.3 watts (Power Off)
EIA Standard NTSC color
4 rotary heads helical
scanning system
1 track (Normal)
VHF 2~13, UHF 14~69
Midband A through I (14-22)
Superband J through W (23-36)
Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)
Special CABLE channel 5A (01)
Ultraband 65-94, 100-125
41°F~104°F (5°C~40°C)
10%~75%
7.7 Ibs. (3.5 kg)
14-15/16" (W) x 3-2/3" (H) x
12-316" (D)
380 (W) x 93 (H) x 310 (D) mm
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking
Control
(to reduce
Use during Playback and Slow Motion mode
to reduce picture noise. To return to Auto Tracking,
press POWER off, then on again.
icture noise
29
UDIJE
SYIS
Y YIA
Advertisement
Table of Contents
