Table of Contents
Advertisement
7.9 WLAN AP (Access Point)
The device can be used as a wireless access point with the WLAN AP function. You can connect
your phone or PC to the device AP, so as to access to the device and configure the parameters via
your phone or PC.
Note
The function is only supported by certain device models.
7.9.1 Set WLAN AP
Steps
1. Go to Configuration → Network → Advanced Settings → WLAN AP .
2. Select the WLAN AP mode.
On
The function is enabled.
Maintenance Mode
The WLAN AP function is automatically turned on for 5 minutes after the device is cold
booted (by turning the switch on the device to ON), after which the WLAN AP function is
turned off if the device's 4G communication is normal, and remains on if the device's 4G
communication is abnormal.
Off
The function is disabled.
3. Set the related parameters.
SSID
The default SSID of the device is named as "Hik-Serial Number". You can define it as needed.
Security Mode
WPA2-personal mode is supported.
Encryption Type
AES and TKIP are selectable.
Password
The password for wireless connection via the device AP. The default password is the nine-digit
serial number of the camera. Please change the default password and set a strong password
after logging in for the first time.
Network Camera User Manual
59
Advertisement
Table of Contents
