Table of Contents
Advertisement
Next steps
1. Install the
display panel for computers shipped with a plastic
2. Install the
display bezel for computers shipped with a plastic
3. Install the
display assembly for computers shipped with a plastic
4. Install the
wireless card for computers shipped with a plastic
5. Install the
M.2 2230 solid-state drive for computers shipped with a plastic
6. Install the
base cover for computers shipped with a plastic
7. Follow the procedure in
Camera
Removing the camera for computers shipped with a plastic chassis
CAUTION:
The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base cover for computers shipped with a plastic
3. Remove the
M.2 2230 solid-state drive for computers shipped with a plastic
4. Remove the
wireless card for computers shipped with a plastic
5. Remove the
display assembly for computers shipped with a plastic
6. Remove the
display bezel for computers shipped with a plastic
7. Remove the
display panel for computers shipped with a plastic
About this task
The following images indicate the location of the camera module and provide a visual representation of the removal procedure.
Figure 84. Removing the camera
Steps
1. Disconnect the display cable from the connector on the camera module.
116
Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
chassis.
chassis.
chassis.
chassis.
chassis.
chassis.
computer.
computer.
chassis.
chassis.
chassis.
chassis.
chassis.
chassis.
Advertisement
Table of Contents
