Installing the docking board
1.
Connect the docking board connector cable to the system board.
2.
Align the docking board with the system board and install the screws that secure it.
3.
Route the docking board antenna cables through the routing channels.
4.
Connect the antenna cables to the corresponding location on the docking board.
5.
Install the:
a.
base cover
b.
battery
6.
Follow the procedure in
Memory module
Removing the memory module
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
base cover
3.
Pull the clips securing the memory module until the memory module pops up [1].
4.
Remove the memory module from the memory module socket[2].
After working inside your
Before working inside your
computer.
computer.
27