Guidelines For Operating Cisco Catalyst Access Points In Japan - Cisco Catalyst Wireless 9166D1 Series Installation Manual

Declarations of Conformity and Regulatory Information

Guidelines for Operating Cisco Catalyst Access Points in Japan

This section provides guidelines for avoiding interference when operating Cisco Catalyst access points in
Japan. These guidelines are provided in both Japanese and English.
1.
2.
3.
English Translation
This equipment operates in the same frequency bandwidth as industrial, scientific, and medical devices such
as microwave ovens and mobile object identification (RF-ID) systems (licensed premises radio stations and
unlicensed specified low-power radio stations) used in factory production lines.
1. Before using this equipment, make sure that no premises radio stations or specified low-power radio
2. If this equipment causes RF interference to a premises radio station of RF-ID, promptly change the
3. If this equipment causes RF interference to a specified low-power radio station of RF-ID, contact the
Statement 371—Power Cable and AC Adapter
English Translation
When installing the product, please use the provided or designated connection cables/power cables/AC
adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and Material
Safety Law prohibits the use of UL-certified cables (that have the "UL" shown on the code) for any other
electrical devices than products designated by CISCO. The use of cables that are certified by Electrical
03-6434-6500
stations of RF-ID are used in the vicinity.
frequency or stop using the device; contact the number below and ask for recommendations on avoiding
radio interference, such as setting partitions.
number below.
Contact Number: 03-6434-6500
Cisco Catalyst Wireless 9166D1 Series Wi-Fi 6E Access Point Hardware Installation Guide
Guidelines for Operating Cisco Catalyst Access Points in Japan
I
45