Cisco Catalyst Wireless 9166D1 Series Installation Manual page 31

Installation Overview
Item
#
7
8
Figure 20: AIR-AP-BRACKET-2 Attachment to Access Point Bracket Plate
Figure 21: Wall Flange Mounting Holes
Procedure
Step 1
Determine the mounting location for the access point.
Step 2
Attach the wall mounting flange to the wall or ceiling using four M6 screws through the holes in the bracket.
Caution
Note
Step 3
Attach the AIR-AP-BRACKET-2 to the access point bracket using four M4 screws through the holes in the
bracket.
Hand tighten snug the four screws.
Mounting Bracket Kit
M8 flanged lock nut
Pole or wall mounting flange
The mounting wall, attaching screws, and wall anchors must support a 50-lb (22.7–kg) static
weight.
The mounting kit does not include the M6 screws for securing the bracket to the mounting surface.
Cisco Catalyst Wireless 9166D1 Series Wi-Fi 6E Access Point Hardware Installation Guide
Mounting on a Wall or Ceiling Using Articulating Bracket
Quantity Tightening Values
2 5.6 lb-ft to 5.9 lb-ft (7.6 Nm to 8.0 Nm)
1 —
23