Table of Contents
Advertisement
INSTALLATION
Product Specification
Model
Power
Rated power consumption
Battery specification
Charging time
Handy
Cleaning
time
Soft Action
[Default:
Brush
(MID)]
Turbo Action
Brush
❇ ❇ Charging and cleaning time may differ depending on the brushes and the conditions of use.
Installation
Installing the wall mount
CAUTION
• Install the wall mount on a hard concrete
wall.
– If it is installed on a wood or plaster wall,
the product may fall.
#1 Assembling the wall mount
• To disassemble the wall mount, follow steps
in reverse order.
Lithium-ion 21.6 V, 1800 mAh, 6 cell
Approximately 3 minutes (JET) / Approximately 5 minutes (MAX) /
Approximately 30 minutes (MID) / Approximately 60 minutes (MIN)
Approximately 5 minutes (JET) / Approximately 9 minutes (MAX) /
Approximately 18 minutes (MID) / Approximately 27 minutes (MIN)
Approximately 5 minutes (JET) / Approximately 9 minutes (MAX) /
Approximately 18 minutes (MID) / Approximately 27 minutes (MIN)
VS20B75**** Series
100-240 V ~ 50-60 Hz
550 W
3.5 hours
#2 Installing the wall mount
01 The wall mount installation should be set
so the top of the wall mount is 113 cm
from the floor.
02 Using the wall mount as a template, mark
where the screw holes will be placed.
03 Drill the holes to a depth of 50 mm using
a 6 mm drill bit, and put the provided
screw anchors into the hole.
04 Fix the wall mount to the wall with the
provided screws.
05 Plug in the wall mount, place the vacuum
into the wall mount, and then confirm that
the battery level indicator is displayed.
❇ ❇ Please refer to the QR code for
detailed information on the
installation of the wall mount.
English 11
Advertisement
Table of Contents
