Advertisement
HIGH WINDSCREEN
HIGH WINDSCREEN
KNUCKLE GUARD EXTENSION
KNUCKLE GUARD EXTENSION
• Reduce speed when running in strong wind.
• Replace this accessory with a new one if it is
damaged or discolored excessively.
• When this accessory becomes dirty, rinse it
thoroughly with cool water to remove loose dirt,
then wipe with a clean cloth or sponge.
Do not use a brush to clean this accessory as it
may scratch the surface.
• Never use organic solvents such as gasoline,
thinner and benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake or battery fluid at once as
they may damage the surface.
• If the motorcycle is left covered for an extended
period of time, park in the shade. Parking a
covered motorcycle in direct sunlight can cause
the windscreen to deform due to heat buildup
under the cover.
• Handle this accessory with care.
It can be damaged when it is bent excessively or
is subject to strong shock or impact.
• Select a firm, level surface when you park the
motorcycle.
Also bear in mind that strong wind can cause the
motorcycle to topple to the ground.
• When this accessory becomes dirty, rinse it
thoroughly with cool water to remove loose dirt,
then wipe with a clean cloth or sponge.
Do not use a brush to clean this accessory as it
may scratch the surface.
• Never use organic solvents such as gasoline,
thinner and benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake or battery fluid at once as
they may damage the surface.
• Handle this accessory with care.
If can be damaged when it is bent excessively or
is subject to strong shock or impact.
CRF1100A/A2/A4/D/D2/D4
Genuine Accessory User's Guide
LOW SEAT / HIGH SEAT
LOW SEAT
HIGH SEAT
MAIN STAND
MAIN STAND
• When this accessory becomes dirty, rinse it
thoroughly with cool water to remove loose dirt,
then wipe with a clean cloth or sponge.
Do not use a brush to clean this accessory as it
may scratch the surface.
• Never use organic solvents such as gasoline,
thinner and benzine to clean this accessory. Also
do not use acid or alkaline cleaners to clean this
accessory.
Wipe up spilled brake or battery fluid at once as
they may damage the surface.
• Before starting your motorcycle, check that the
side stand and the main stand are fully retracted.
• Always choose a flat ground when setting the
main stand.
• Always use the parking brake when parking the
CRF1100D/D2/D4 and using the main stand.
HOW TO USE THE MAIN STAND
1. Park safely on a level ground and stop the
engine.
2. Setting the main stand.
• Let down the main stand, stand on the left
side of the motorcycle. Hold the left handle
grip and the pillion step holder or rear
carrier. Press down on the tip of the stand
with your right foot and, simultaneously,
pull up and back.
PILLION STEP HOLDER
4 of 22
Advertisement
