AEG 7DBG83P User Manual page 16

16 www.aeg.com
4. If necessary, clean the filter with a
vacuum cleaner. Close the filter.
5. If necessary, remove fluff from the
filter socket and gasket. You can use
a vacuum cleaner. Place the filter
back inside the filter socket.
10.2 Emptying the water
container
Empty the condensed water container
after each drying cycle.
If the condensed water container is full,
the programme stops automatically. The
tank (reservoir) symbol comes on the
display and you must empty the water
container.
To empty the water container:
1. Pull the water container out keeping
it in a horizontal position.
2. Pull the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3. Push the plastic connection back in
and place the water container back
into position.
4. To continue the programme press
the Start/Pause (/Pauze) button.
10.3 Cleaning the condenser
condenser (condensor)
If the symbol
flashes on the display, inspect the
condenser and its compartment. If it is
dirty, clean it. Do the check not less than
once a 6 months.
WARNING!
Do not touch the metal
surface with bare hands. Risk
of injury. Wear protective
gloves. Clean carefully to
avoid damaging the metal
surface.
To inspect: