Care And Cleaning - AEG 7DBG83P User Manual

1. Turn the appliance on.
2. Select 1 of the available programs.
3. Touch and hold down the Dryness
(Droogtegraad) and Refresh
(Opfrissen) buttons at the same
time.
One of the symbols appears on the
display:
- Maximum dryness
- Extra dryness
- Standard dryness
4. Touch the Start/Pause (/Pauze)
button repeatedly until you reach the
desired dryness level.
Dryness lev-
el
Maximum
dryness
Extra dry-
ness
Standard
dryness
5. To memorise the setting touch and
hold down the Dryness
(Droogtegraad) and Refresh

10. CARE AND CLEANING

10.1 Cleaning the filter
At the end of each cycle the
symbol comes on the display and you
must clean the filter.
The filter collects the fluff
during the drying cycle.
1. Open the door. Pull the filter up.
Display symbol
filter
(Opfrissen) buttons at the same time
for approximately 2 seconds.
9.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available programs.
3. Touch and hold down Refresh
(Opfrissen) and Time (Tijd) buttons
at the same time.
One of 2 configurations is possible:
• the tank (reservoir) indicator:
on if the symbol
- the water container indicator is
permanently activated
• the tank (reservoir) indicator:
off if the symbol
- the water container indicator is
permanently deactivated
2. Push the hook to open the filter.
3. Use a moist hand to clean both parts
of the filter.
ENGLISH 15
is
appears
is
appears