Miele HS23 Operating Instructions Manual page 6

Cordless vacuum cleaner
Hide thumbs Also See for HS23:
Table of Contents

Advertisement

Warning and Safety instructions
Compare the connection data on the data plate of the charger
(voltage and frequency) with that of the mains electricity supply. This
data must match exactly. Without modifications, the charger is suit-
able for 50 Hz and 60 Hz.
The mains electrical plug must be fitted with an appropriate fuse.
Check both the vacuum cleaner and all accessories supplied with
it for any visible signs of damage before use. Do not use a damaged
vacuum cleaner or damaged accessory.
The Miele MultiFloor electrobrush and the Miele Electro Com-
pact handheld brush (depending on the model) are additional motor-
driven devices designed specially for this Miele vacuum cleaner. For
safety reasons, the vacuum cleaner must not be used with a different
Miele electrobrush/handheld brush or an electrobrush/handheld
brush produced by another manufacturer.
Before and during use, make sure that no coarse dirt or debris is/
gets trapped in the bottom of the MultiFloor electrobrush or in the
bottom of the Electro Compact handheld brush (supplied depending
on the model).
Store the vacuum cleaner and all accessories at an ambient tem-
perature between 0 °C and 45 °C.
Only store the vacuum cleaner in a horizontal position or fit it into
the wall bracket.
While the vacuum cleaner is under warranty, repairs should only
be undertaken by a Miele authorised service technician. Otherwise
the warranty will be invalidated.
Repairs should only be carried out by a Miele authorised service
technician. Repairs and other work by unqualified persons can cause
considerable danger to users.
6

Advertisement

Table of Contents
loading

Table of Contents