Table of Contents
Advertisement
Clean the roller brush and remove
any stubborn dirt inside the electro-
brush.
If there is heavy soiling between the
handle and the roller brush, you can
release the handle.
C Pull lightly on the handle until it is re-
leased.
Remove the soiling.
Lock the cleaned handle back into
the roller brush.
Push the roller brush as far as it will
go into the electrobrush until it is in
position.
Lock the roller brush.
Removing the roller brush from the
handheld brush (depending on the
model)
You can take the roller brush out of the
handheld brush in order to remove
stubborn soiling and clean the inside of
the handheld brush.
A Release the roller brush using a coin.
B Remove the roller brush.
Clean the roller brush and remove
any stubborn dirt inside the handheld
brush.
Reassemble the handheld brush in
reverse order.
Replacing the battery
An original Miele AP10/AP11 lithium-ion
rechargeable battery is required.
Follow the instructions regarding the
handling and disposal of rechargeable
batteries found in the following sec-
tions: "Warning and safety notes",
"Sustainability and environmental pro-
tection" and "Commissioning" ("Gen-
eral battery information").
Remove the fine dust filter from the
PowerUnit.
29
Advertisement
Table of Contents
