Scene Mode - Bosch DINION 7100i IR NBE-7702-ALX User Manual

DINION 7100i IR
4.4.4

Scene Mode

A scene mode is a collection of image parameters that are set in the device when that
particular mode is selected (installer menu settings are excluded). Several pre-defined modes
are available for typical scenarios. After a mode has been selected, additional changes can be
made through the user interface.
Current mode
Notice!
i
Some modes might behave differently in single exposure sensor mode and HDR sensor mode.
Standard
This mode is optimized for most standard scenes both indoor and outdoor.
Sodium lighting
This mode can be used in applications with street (sodium vapor) lighting. A special white
balance algorithm compensates for the yellow / orange color of the lights.
Fast movement
This mode is used for monitoring fast moving objects like cars in traffic scenes. Motion
artifacts are minimized and the image is optimized for a sharp and detailed picture in color
and monochrome.
Sensitivity boost
This mode provides maximum sensitivity in low light scenes by using longer exposure times,
resulting in bright images even in extreme low light. It can introduce motion blur because of
the slow shutter speed.
Backlight
In this mode Intelligent Auto Exposure is enabled, it automatically optimizes the exposure for
the moving objects in the scene. It is ideal for cameras monitoring an entrance with people
moving in front of a bright background.
Vibrant
This mode provides a more vivid image with increased contrast, sharpness and saturation.
This is at the expense of slightly reduced color accuracy and higher bit-rate.
Color only
In this mode the camera will not switch to monochrome mode at low light levels. It can be
used for scenarios where color images are required day and night, like in city surveillance.
Sports and gaming
This mode is for high-speed capture, and improved color rendition and sharpness.
Retail
This mode has improved color rendition and sharpness with reduced bandwidth requirements.
LPR
This mode is optimized for capturing reflective number plates at high speed in combination
with IR-lighting. Short shutter speeds and low maximum gain providing sharp and high
contrast images of license plates.
Notes:
–
Bosch Security Systems B.V.
During night-time, in monochrome mode only, the license plates will be clearly visible
while the rest of the scene will be dark.
User manual
Configuration | en
2023-06 | V02 | F.01U.390.686
27