Using The Radio - Pioneer SUPERTUNER KE-3750QR Owner's Manual

Using the Radio
Pop-up button
Band Tuning Preset
KE-37500R
Fader Bass Treble Display
Best stations memory
Local station
Preset scan
Volume/balance/loudness/power switch (KE-37500R)
Volume/balance/power switch (KE-27500R)
Loudness (KE-37500R) Seek
Frequency
"Loup Loc seek |
'CD.
Stereo
Band Preset number
for)
Before attempting operation...
Set the fader control to the left horizontal.
Turning the power switch to the right causes power to switch ON
and the current frequency to appear on the display.
Since the set is designed preferentially for tape play, eject a
cassette tape, if mounted, before operating the radio.
. Press the band switch to select the band.
. Press both ends of tuning button and the seek tuning indicator
will appear on the display.
Press either the left or right side of the tuning button to tune in
the desired frequency. (Pressing the right side will increase the
frequency.)
. Adjust the volume and balance. To adjust the balance, first pull
the knob until a click is heard. After setting to the desired level,
push the knob in again to its original position.
. Adjust the tone.
To enter a frequency into the preset memory...
. Hold down one of the preset buttons (1-6) for approximately two
seconds. The frequency is stored in memory (assigned to the
preset button pressed) once the preset number stops flashing on
the display.
Six FM1 frequencies, six FM2 frequencies, six FM3 frequencies
and six AM frequencies can be entered.