Table of Contents
Advertisement
Installation
Note:
@ If installation angle exceeds 30° from horizontal, the unit might
@ Use only the parts included with the unit to ensure proper instal-
not give its optimum performance. (Fig. 1)
lation. The use of unauthorized parts can cause malfunctions.
@ Before removing this unit from your vehicle, be sure to remove
® Consult with your nearest dealer if installation requires the drill-
cassette tapes and make sure that radio power is switched OFF.
ing of holes or other modifications of the vehicle.
Installation with the rubber bush
Dashboard
Select the appropriate mounting bracket
tabs to match the thickness of the dash-
7
board
and
bend
them
in using
a flat
30
screwdriver.
Fig. 1
Install it with stamp (A) facing upward.
Advertisement
Table of Contents
