Table of Contents
Advertisement
PN Velfomat-ree)cellare
Recording on an Audio Tape Deck or DAT Deck
POWER
> ON
To DAT or TAPE 1, 2
REC OUT
Turntable system
CD player
VCR
2
DAT or Tape deck
1 Select the desired program source with the
FUNCTION
selectors.
For an FM/AM broadcast, tune in the desired
station.
2 Set the tape (DAT) deck in the recording mode.
3 Start the selected program source.
i
°
Tape deck 1
or DAT deck
fixelam e)i-y'20r: (01,0)
Tape deck 2
((felanc-ere)cel ale)
1 Insert the recorded tape into tape deck 1 (or the
DAT deck).
2 Insert a blank tape into tape deck 2 and adjust
the recording level.
3 Press TAPE 1 or DAT to select the deck for
playback.
4 Start the playback of the tape (or the DAT) in the
tape deck 1 (or the DAT deck), and set tape deck
2 in the recording mode.
Dubbing will start.
Notes on recording
«Use TAPE 2 REC OUT for the recording with the surround,
equalizer, and DDS effects.
«For other QUT jacks, the settings of the surround, equalizer,
and DDS effects do not have any effect on recording.
Monitoring the recorded sound
If you have connected a tape deck having separate record and
playback heads to the TAPE jacks, you can monitor the record-
ing results. While recording or dubbing, press the TAPE 2 MO-
NITOR button. To listen to the source sound again, press the
button again.
24
Note on tape dubbing
Tape dubbing is possible only in the following directions:
From
To
FUNCTION
(playback side}
{Recording side)
selector to be
prressed
Tape deck conneted
| Tape deck connected
TAPE 1
to TAPE 1 IN
to TAPE 2 REC OUT
DAT deck connected
to DAT REC OUT
DAT deck connected
| Tape deck connected
DAT
to DAT IN
to TAPE 1 or 2 REC
OUT
Advertisement
Table of Contents
