Table of Contents
Advertisement
Viewing
the
recording
on TV
Connect your camcorder to your TV or VCR with the AiV connecting cable supplied
with your camcorder
to watch the playback picture on the TV screen. You can operate
the playback control buttons in the same way as when you monitor playback pictures
on the LCD screen. When monitoring
the playback picture on the TV screen, we
recommend
that you power your camcorder from a wall outlet using the AC power
adaptor (p. 11). Refer to the operating
instructions of your TV or VCR.
C_en the jack cover. Connect your camcorder to the TV using the A/V connecting
cable. Then, set the TV/VCR selector on the TV to VCR.
VIDEO
_IDEO
AUDIO
: Signal
flow
S VIDEO
,,v,o o
: oo,o U
l
m
Connect your camcorder to the LINE IN input on the VCR by using the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
Connect the yellow plug for video and the white plug for audio on both your
camcorder and the TV or the VCR (you do not need to connect the red plug).
With this connection, the sound is monaural even on stereo models.
Use an NTSC system
RFU adaptor
(not supplied).
Refer to the operating
instructions
of your 'IV or VCR and the RFU adaptor.
With an
RFU adaptor,
the sound
is monaural.
- If your "IV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures. With this
connection,
you do not need to connect the yellow (video) plug of the A/V connecting
cable.
Connect the S video cable (not supplied) to the S video jacks on both your camcorder
and the TV or the VCR.
25
Advertisement
Table of Contents
