Hours Meter - Sony Hi8 EVV-9000P Manual

[13] MONITOR SELECT switches
The right and left switches select the audio signa! output from the AUDIO OUT
connector [32] and the speaker [5] or the EARPHONE jack [29].
Left switch Right switch
AFM
Audio signal output
Sound of the AFM channel
Sound of the PCM1 channel
Mixed sound of the PCM1 and PCM2
channels
Sound of the PCM2 channel
AFM INPUT SELECT switch
Selects the audio signal to be recorded on the AFM and PCM1 channels.
CAMERA
MIC
AUDIO CH-1
AFM channel: the signal from the microphone on the video camera
PCM1 channel: the signal input to the AUDIO CH-1 connector [25].
AFM channel: the signal input to the AUDIO CH-1 connector [25].
PCM1 channel: the signal from the microphone on the video
camera.
[15] SELF DIAG switch
Provided for maintenance service. Do not operate this switch.
ALARM control
Adjusts the level of the warning beep. When turned fully counterclockwise, the
warning beep cannot be heard.
Minimum ; Maximum
HOURS METER
Shows the hours when the VTR has been in service. (One division represents 100
hours.) When the meter indicates maximum 1000 hours, contact you authorized
Sony dealer to replace the meter and video heads with new ones.
13