Cable Connections For Watching Conventional Tv Channels; Connecting A Vhf/Uhfantenna; Connecting A Cable Converter - Pioneer PDP-5040HD Operating Instructions Manual

CabUe connections for watching conventionaU TV channeUs
In order to watch conventional TV channels, connect coaxial cables as shown below. To enjoy a clearer picture, use
an outdoor antenna. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the
anterma terminal at the rear of the Media Receiver.
Connecting a VHFIUHF antenna
VHF antenna
U/V mixer
\
\
0
-- The coaxial cable is
al ready co nnetted at
the tirae of purchase=
Connecting a Cable Converter
Cable TV
Cable Converter
Media Receiver (rear)
When making the above connections, first
remove the coaxial cable attached before
shipment=
ER
PDP5040H D-Eng (17-27) 24 7/24/03, 1:58 PM