Transportation, Storage And Disposal - Husqvarna DC 2-48 Operator's Manual

Problem
The pressure in the
pressure tank is less
than 7 bar.
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
behind a vehicle.
• Make sure that the electrical cable and
dust extraction hose are disconnected before
transportation. Close the air intake when the dust
extraction hose is disconnected.
• Remove the collected dust before transportation.
• The wheels let you move the product shorter
distances. For longer distances, lock the wheels and
lift the product to move it or put the product on a
vehicle.
• Put some type of protection on the product during
transportation. The protection keeps rain and snow
away from the product.
• Make sure that there is no pressure in the pressure
tank before transportation.
• Use the drive system for transportation only when all
other functions are off.
To engage the drive system
WARNING:
from rotating parts. Be very careful when
you attach the quick-release pin.
Install the quick-release pin to engage the drive system.
The quick-release pin is found adjacent to the drive
system.
2121 - 002 - 04.07.2023
Cause
The filter for the water separator is dirty or
damaged.
The compressor filters are dirty or damaged.
There is a leakage in the tubes.
The control valve is damaged.
The pneumatic system is damaged.

Transportation, storage and disposal

Be careful during
Do not tow the product
Keep your hands away
Solution
Clean the filter for the water separator. Re-
place if it is necessary.
Clean the compressor filters. Replace if it is
necessary.
Speak to an approved service agent.
Speak to an approved service agent.
Do a check of the pneumatic system.
1. Turn the height adjustment handles (A) to lower
the casters (B) until the drive system (C) is off the
ground.
C
2. Energize the drive system.
A
B
21