Scan - Kenwood TS-450S Instruction Manual

62
4-13. SCAN
Both Memory Scan and Program Scan are possible.
4-13-1.
Memory Scan
1. When operating in the VFO mode , press the M/V
key.
The display will indicate the memory channel that
was accessed last.
2. When the SCAN key is pressed, memory channel
scan will be repeatedly scanned.
3. The M.CH/VFO CH control and the microphone
UP/DOWN key are accepted even during scanning
Note
i If no memory channel contains data or all the
| channels are locked out, CHECK is output from th
speaker in Morse code as an error signal when th:
SCAN key is pressed.
4. To cancel scan press the CLR key.
5. To return to VFO operation, press the M/V key.