Scan Operation - Kenwood TR-50 Instruction Manual

@ SCAN OPERATION
1 | Scan start The MS annunciator will light, and scan will
proceed from channel 1 thru channel 5.....
Memory channels without data will not be
scanned.
eee)
The BUSY indicator will light, and scan will
stop, when a signal is received. Scan will
resume when the carrier drops out.
The radio will advance to the next channel,
even if a signal is present.
The unit will revert to MR mode.
or Mic PTT
switch
Scan Release
1) When the VEO is at point ''a'', scan will proceed as follows:
1270.00 &
UP scan
1260.00 1299.98(VFO-A)
1299.99(VFO-B)
2)
DWN scan
Repeat
17