Pioneer CT-W851R Operating Instructions Manual

Operating
Instructions
STEREO DOUBLE CASSETTE DECK
CT-We51R/CT-W8O1R
CT-W701R/CT-W601K
* The above illustration shows CT-W851R.
® For the demo function, refer to back cover of this operating in-
structions.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your unit properly. After you have
finished reading the instructions, keep the manual in a sate
place for future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the
explanatory drawings. However, the method of connecting and
operating the unit is the same.
WARNING sto prevent Fire On SHOCK HAZ-
ARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models}
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep it in a secure area. This is for your
security.
{For Canadian model]
CAUTION:10 prevent etectric sHock Do
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION:rour prevenia Les cHocs
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
>EUVENT ETRE INSEREES A FOND SANS EN LAISSER
\UGUNE PARTIE A DECOUVERT.
"This product complies with the Redio Interference require.
nents of the EC {European Community} Directive 87/308/FEC."
[LINE VOLTAGE SELECTOR SWITCH |
Mediur-size
screwdriver
Only multi-voltage models are provided with this switch. U.S.,
Canadian, European, U.K., and Australian models are not
provided with this switch.
Main voltages in Saudi Arabia are 127V and 220V only. Never
use this model with a 110V setting in Saudi Arabia.
The line voltage selector switch is on the rear panei. Before
your model is shipped from the factory, this switch is set to
the power requirements of the destination. Check that it is
set properly before plugging the power cord into the AC out-
let. if the voltage is not properly set or if you move to an area
where the voltage requirements differ, adjust the selector
switch as follows.
1. Discennect the power cord.
2. Use a medium-size screwdriver,
3. Insert the screwdriver into the groove on the voltage selec-
tor, and adjust so that the tip of the arrow points to the
voltage value of your area.
©®) PIONEER'
The Art of Entertainment