Advertisement
least five seconds and then released, the sensor will reboot and it will be restored to its original factory settings by
deleting all configuration information stored on the unit.
USB-C Port
The MT15 sensors have a USB-C Port on the back that can be used to provide an alternate source of power using a
compatible accessory.
RJ45 Port
The MT15 sensor also has a RJ45 port for PoE on the bottom that can be used to provide an persistent source of power
using a PoE switch.
RJ45 and USB-C are ONLY used for Powering the Device. An ethernet link between MT15 and the upstream
switch port will NOT be established. An MV or MR Gateway is still required.
Package Contents
Unit
Guides
Mounting equipment
MT15-HW
Quick Install Guide
Wall Mount Backplate
2x Mounting Screws
2x Drywall Anchors
1x Self-retaining security screw
3
Advertisement
