Advertisement
General Purpose Button
The MT15 has a general purpose button on the top which allows you to wake up the sensor and test if it is able to
connect to a gateway.
Multicolor, multifunction LED Ring
MT15 is the first MT Sensor which can visually indicate the conditions of the environment without the use of the Meraki
Dashboard. This is done via the LED Ring on the front of the device, which can represent any of the measured metrics
and is configurable via the dashboard.
Factory Reset Button
On the back of the sensor, there is a pinhole button to factory reset the sensor. If the button is pressed and held for at
• General purpose button
• Reset button
• USB-C Port (Power Only)
• PoE Port (Power Only)
2
Advertisement
