Valve Clearance; Tires - Yamaha C3 2008 Owner's Manual

Tires<IXE>

Valve clearance

The valve clearance changes with use,
resulting in improper air-fuel mixture and/
or engine noise. To prevent this from
occurring, the valve clearance must be
adjusted by a Yamaha dealer at the in-
tervals specified in the periodic mainte-
nance and lubrication chart.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU21401

Tires

To maximize the performance, durabil-
ity, and safe operation of your scooter,
note the following points regarding the
specified tires.
Tire air pressure
The tire air pressure should be checked
and, if necessary, adjusted before each
ride.
WARNING
Never overload your vehicle. Opera-
tion of an overloaded vehicle could
cause an accident.
Tire air pressure* (measured on cold
tires):
Front:
175 kPa (1.75 kgf/cm
Rear:
175 kPa (1.75 kgf/cm
EAUT2151 Tire inspection
ZAUM00**
EWA10511
1. Tire tread depth
2. Tire sidewall
Always check the tires before operating
the scooter. If a tire tread shows cross-
wise lines (minimum tread depth), if the
tire has a nail or glass fragments in it,
or if the sidewall is cracked, contact a
Yamaha dealer immediately and have the
tire replaced.
2
, 25 psi)
2
, 25 psi)
Tire information
This scooter is equipped with cast
wheels and tubeless tires.
6-49 6-14
2
Minimum tire tread depth (front and
rear):
0.8 mm (0.03 in)
EAU1722A
1
1
2
3
4
5
6
7
8
9